Tuesday, April 30, 2013

Try It Tuesday - Rose is on the move

Hi all, I keep believing that Spring is going to appear any day now.  Wherever Rose is, there is spring and she's on the move - Riding her bicycle in the glorious sunshine and fresh, clean air.  P1020580 copy
I've used a wonderful stamp, that I've been eyeing for quite a while - Rose's Bike Ride, a Wee Stamp for Whimsy Stamps.  While rummaging through old card ideas, I came upon a template for a "Simple Slider Card", and decided that Rose would be a great example.  The tutorial for the card, can be found here.  I have adapted the measurements to suit the image.
My card measures 6 1/2" x  5 1/2".  I started with a piece of Cardstock measuring 12" x 6" scored at:  1/2"; 5 1/2";(mountain folds) 10 1/2"; 10 3/4" 11 1/4" and 11 1/2".  (Valley folds).  I started a tutorial, but my eyes gave out along with my camera battery.  
P1020588 copy
Notice that Rose slides to the right when the tag is pulled.  I haven't stamped the tag as yet - but will add a signed sentiment before the card is given away.
Materials used: Rose's Bike Ride, Cougar White (copic card stock), Memento Tuxedo black ink, Copic Markers:  R00, E11, R20, E30, E31, E34, E37, BG01, BG05, B04, BG10, BV02, C0, C01, YG24, Sakura Stardust Pen, Sakura White Gel Pen. 
Materials from stash:  Flowers, Ribbon, Brad, Grass Punch, MS Border / Corner punch, Butterfly charm, Stickles.
My intention was to cut Rose out, however, cutting off all the beautiful squiggles that add such wonderful detail to the stamp would have been lost - so a messy cut was what happened.
Remember, Stamp up a storm, ink up a wish and send it on to someone to make their day.
madge0902 (1)

Monday, April 29, 2013

Whimsy "Try it Tuesday" #11

Did you miss last Tuesday's Newsletter?  Totally my fault.  We changed location and our cable / wi-fi was not hooked up to send.  It took a couple of days to get back on track - but thankfully tech support managed to fix the situation.  Never-the-less, this should have pre-posted from my home computer - and it didn't - My old brain is not clever enough to try to second guess an electronic device. 
I have a short, but sweet, post for todays "Try It Tuesday" using a sweet digital image with a bonus Sentiment set from StampArt Design called Ari & Toby. Kathryne has captured these sweet little children at their cutest.
P1020534 copy
Materials used:  Toby & Ari, by StampArt Design, Cougar White (copic paper), Memento Tuxedo Black ink, Mustard Seed (Tim Holtz distress ink), Glossy Accents (puddle and butterfly), Copic Markers:  R00, E11, R20, E30, E34, E35, R22, R23, R24, R29; BG10, BG13, BG31, C4, C7
From Stash:  Gathered Lace, Friends button, Flowers,Butterfly punch,  and leaf punch.
The image was colored and easily cut out to be popped on top of the DP with foam dots for dimension. The sentiment was cut in a circle and sliced to fit under a slit in the rainbow DP (Websters Pages). Glossy Accents were added to the puddle, Butterfly and bow on the umbrella.
Until next time - "Stamp up a Storm, ink up a wish, and send it on to someone to make their day."
Rubber hugz, Whimsy wishes,
madge0902 (1)

Tuesday, April 16, 2013

Try It Tuesday #10 - Spring Bringer

Hi all for another Whimsy Try It Out Tuesday.  My heart goes out to those who lost loved ones or were injured in yesterday's tragic events in Boston.  It is sad that there are people in this world that will harm innocent people for some unknown reasoning in their sick minds.

On a very much lighter note.  I have a little card today to bring some Spring happiness into your life. P1020527 copy Since we are all so ready for Spring to happen for real, I've created a card to  (shove, kick, boot)....ummmm, help, it along using Spring Bringer, a Wee Stamp designed by Sylvia Zet for Whimsy Stamps. Isn't she adorable??!!

Supplies used:   Spring Bringer; Xpress It Blending Card, Memento Tuxedo Black ink, Designer Papers by Michele R Designs for Whimsy Stamps, Copic Markers:  Skin: R00, E11, R20   Hair:  E30, E34, E35  Wings:  RV52, RV0000  Clothing:  RV0000, RV10, RV63, RV66, RV69  G24,  Flowers:  Y17, RV63, RV66,  Sakura Glitter Pen, Glossy Accents (wings), SU small and large Butterfly punch, SU Colored card stock, EK Success border punch, Sewing Machine (huh!!??) and flowers from stash.

Inside my card,  I've added a special surprise - Butterflies.P1020533 P1020529 








LOTS of Twirling Butterflies.
The tutorial for the Twirling effect can be found at SCS where there is a Video which can give you the visual effect.  My card finished is 5 1/2" x 5 1/2". The bulk of the inside will probably require a box envelope to send and extra postage.  Did I have fun playing??!!  Sure did, it was fun to construct - and that's why I enjoy card making - the challenge and seeing the final results. Giggles can often be heard coming from my Craft Room....... which send my dogs into a tilted head pose.....  (ok, their mommy is a bit strange).

Additional Supplies used for inside:  Designer Papers by Michele R Designs, SU Butterfly punches, unknown stamp, Skewer (painted white and cut to size), string and rhinestones......Oh, almost forgot -- paper beads.

I really have to add that I absolutely love the Designer Papers by Michele R Designs, which until recently were only available to me through digital format.  Our LSS started to carry them and they are absolutely gorgeous and are a  6"x 6" size - perfect for cards.  She has added glossy elements to the paper that are stunning.  I almost hated to cut into them.  Absolutely Beautiful!!

I will be entering this card into the following challenges:
Whimsy Inspirations - Pretty in Pink
Bearly Mine - Spring flowers
Totally Gorjuss # 179 - Spring Shades

Until next time - Stamp up a Storm, ink up a wish, and send it on to someone to make their day.
Rubber hugz, Whimsy wishes,madge0902 (1)

Tuesday, April 9, 2013

Try it Tuesday #9

Hi all, for another Try It Tuesday.
I’ve been playing in my craft room with the Lace Doily Border 1 Die; Lace Doily Corner 1 Die; and Vines Die.clip_image002clip_image003clip_image005
I must admit I was very skeptical ordering these dies, because I looked at the intricate details and did not think that I would be able to cut them without lots of problems……….. NOT. I was so pleased at the details that showed up after cutting!! WOWSERS!! The die cuts actually look like hammered tin. ABSOLUTELY BEAUTIFUL! I separated the die cut from the die and just ran my finger over it to remove the little bits…….NO POKING !!! I am so impressed!!
A LITTLE TRICK WHEN DIE CUTTING: Put a layer of plain old wax paper between your die and cardstock……… Separates the die cut from the die like butter! Well worth the hassle of not having to poke out all those intricate little pieces.
Do you remember that saying………. The best laid plans o’ mice an’ men gang aft a-gley……… Yep, it happens! I had what I considered a wonderful image colored, to mess up. Ergo my plans for that project!! Which brought me to using a different image. Which is why I’m waaaaaaaay behind schedule on posting.
My finished projeclip_image007ct for today is a Double Gatefold Card. Why double? Instead of a normal gatefold – It has an extra flap with an image added to overlap the gatefold.
My husband often asks me why I don’t make just ordinary cards – you know like a piece of paper folded once………. Well, I love different folds! Makes card making all the more fun.
clip_image009
If you wish to challenge yourself to make the Double Gatefold – the secret is to start with a 12” x 5 ½” piece of cardstock. Then you score along the 12” edge at: 2”, 4”, 8” and 10”. That will give you the base to decorate however you wish. You can also use an 11” x 5 ½”…..and work out the measurements for scoring (have fun with that one.....lol).
Materials used: Goldie Locks, an Elisabeth Bell image for Whimsy Stamps, 12 x 51/2” white cardstock; 4 - 1 7/8” x 5 3/8” black pieces; 4 – 1 5/8” x 5 1/8” pcs, DSP; Xpress It Blending card; additional DSP and Black for matting; Vines Die; Copic Markers: Skin: R00, E11, R20 Hair: E 25, E29, E27 Clothing: Y20, Y21, Y26, Y28 Misc: C1, C4, YG24. Butterfly, ribbon and brads from stash.
Did you happen to notice the flowers in the bottom left corner??clip_image021
I used the Lace Doily Border 1 Die for them. I did mention that I was “PLAYING” in my craft room, didn’t I?? LOL
clip_image011clip_image013clip_image015clip_image017
I started with the Lacey Die cut…….. In the next photo you can see the cut marks (in black) for each petal. NOTICE the intricate details of the die!!!
You will need 8 petals for each flower. Overlap the cutouts of the petals and glue in place. Four petals will create one layer for the flower.
clip_image019
Here are some layered flowers created, using a ¼” circle punch to add a center to the flowers, and sponging the edges with ink.  Pretty......
clip_image021
Here is the image of my “Crinkled Flowers". The flat layers were sponged with ink with a brad added for the center, then literally pummeled, pinched, folded and scrunched!
As I mentioned before……. I was playing.
Now my disaster for the day……. Oh my intentions were so cotton-pickin’ good……. But my finished product was way toooooo big for my already finished card and I made a very noticeable boo-boo:(
The image is a Chrissie Armstrong image called Crown of Daisies. She is just so pretty. The copics used are the same as above. The reason I am showing you this is because………… Once again, I cut the Lace Doily Border 1 Die into sections and added them to the image to make a border. WOWSERS ………. Oh my, I love the embossing – looks like a hammered tinplate!
clip_image023
Well, that is all I have to show you for today. “Remember, stamp up a storm, ink up a wish and send it on to someone to brighten their day.
Til next week, Rubber hugs, and Whimsy Wishes,

Tuesday, April 2, 2013

Hidden Message Easel Card Tutorial

"Hidden Message" Easel card Tutorial
clip_image001

Closed View – flat for mailing.

clip_image002

Open View – for display.

clip_image003

Side View – to show footprint of card when open.

Materials used:

"Gracie" from StampArt Designs, exclusively for Whimsy Stamps", Xpress It Blend Cardstock, Memento Tuxedo Black Ink, DP from stash, Flowers - assorted Whimsy Buds, Copic Markers:  Skin: R00, E11, R20;  Dress: V12, V15, B60, V28;  Hair:  E30, E50, E53, E23, Grass:  YG25, G24, G40; Fence:  E13; E53, E33; Glossy Accents (butterfly and flower in hair), Sakura Glitter Pen, Ribbon (wired) from stash. DP and card stock from stash.

clip_image005

Supplies to Gather:

  • Matted image 3 3/8" x 4 1/4"
  • DP 4 1/8 x 5 3/8"   and 3 3/8" x 1"  (this allows for border punching edge)
  • Sentiment piece 3 3/4" x 5 1/2"  (white)
  • Tag  3 1/4" x 5 1/2"   (white)
  • Cardstock  4 1/4" x 5 1/2"
  • 1" strip of white ( allows for border punching edge)
  • Misc.  D/S tape, foam tape, ribbon, flowers, corner rounder and scallop punch. 

(NOTE:  For the photos of the tutorial I have changed color of paper clip_image006and DP)

1. Flip DP to wrong side and mark 5/8" margins on all four sides.   Before cutting - mark the top margin with dotted lines  _ _ _ _ to indicate a score line.

2. Drop down 1 3/4" and mark on each side of inner box.  _ _ _ _ to score.

3. Measure down another 1 3/4" and mark again _ _ _ _ to score.

4. Cut around the other 3 cut lines, which will give you a 3-sided frame.
clip_image007

5. Your DP will look like this.  Valley, Mtn, valley fold.  (ignore the green cardstock.) clip_image009

6. Flip DP over and apply adhesive to the bottom 1/2" of flap.

7. Line bottom of Tag with very bottom of ½” flap (centered) and adhere.

clip_image011

8. Center your tag behind your DP. Open the flap – Stamp sentiment onto frame showing through the window.

clip_image013

9. Cut a 1" x 4 1/4" strip of white and scallop punch one edge.  Adhere it to the back of the DP (between the DP and tag) to just peek over the edge.

clip_image014

10. With the backside of the DP up - run a line of double sided tape on the edge of the two sides and the bottom.  Do not touch the edge of the tag with the tape. Remove backing of tape and centre the piece over the matted sentiment.

clip_image015

 

 

 

 

11. Adhere your matted image to the 1 3/4" section above the bottom flap, leaving the top half free.

clip_image017
12.  Apply double sided foam tape to the bottom flap and adhere the DP, snuggling it up to the bottom edge of the matted image. The scallop will overhang a bit.
clip_image019
13.  Embellish card to your liking.

clip_image021

I added a wired ribbon bow to the top of the tag

clip_image023

and some ribbon and flowers to the flap.

clip_image025

Remember, stamp up a storm, ink up a wish and send it on to someone to make their day!

Rubber hugz, Whimsy wishes,

madge0902 (1)

Whimsy "Try It Tuesday" #8

Hi all!  Hope you had a good Easter Weekend with family and friends! The weather here in the interior of BC has been incredible, beautiful and warm.
My card today is using a digital stamp called "Gracie" from StampArt Design.P1020469 She is just one of the adorable iP1020449mages











available in the digital category.  I've had her colored since I first laid eyes on her...... perfect for a Spring card.
   My card is a "Hidden Message" Easel card.   
Materials used:  "Gracie" from StampArt Designs, exclusively for Whimsy Stamps", Xpress It Blend Cardstock, Memento Tuxedo Black Ink, DP from stash, Flowers - assorted Whimsy Buds, Copic Markers:  Skin: R00, E11, R20;  Dress: V12, V15, B60, V28;  Hair:  E30, E50, E53, E23, Grass:  YG25, G24, G40; Fence:  E13; E53, E33; Glossy Accents (butterfly and flower in hair), Sakura Glitter Pen, Ribbon (wired) from stash. DP and Cardstock from stash.
Hidden Message Tutorial: 

  • Matted image 3 3/8" x 4 1/4"
  • DP 4 1/8 x 5 3/8"   and 3 3/8" x 1"  (this allows for border punching edge)
  • Sentiment piece 3 3/4" x 5 1/2"  (white)
  • Tag  3 1/4" x 5 1/2"   (white)
  • Cardstock  4 1/4" x 5 1/2"
  • 1" strip of white ( allows for border punching edge)
  • Misc.  D/S tape, foam tape, ribbon, flowers, corner rounder and scallop punch. 


(NOTE:  For the photography of the tutorial I have changed color of paper and DP)




P1020479
  1. Flip DP to wrong side and mark 5/8" margins on all four sides.   Before cutting - mark the top side of the margin with dotted lines  _ _ _ _ to indicate a score line.
  2. Drop down 1 3/4" and mark on each side of inner box.  _ _ _ _ to score.
  3. Measure down another 1 3/4" and mark again _ _ _ _ to score.
  4. Cut around the other 3 lines.P1020482

5. Your DP will look like this.  Valley, Mtn, valley fold.  (disregard the green underneath).
6. Flip DP over and apply adhesive to the bottom 1/2" of flap.
7. Center the tag behind the width and align and adhere it to the bottom edge of flap.
8. Cut a 1" x 4 1/4" strip of white and scallop punch one edge.  Adhere it to the back of the DP to just peek over the edge.
P1020497
9. With the backside of the DP up - run a line of double sided tape on the edge of the two sides and the bottom.  Do not touch the edge of the tag with the tape. Remove backing of tape and centre the piece onto the matted sentiment.
10. Test your tag to see if it moves freely.
11. Adhere your matted image only to the 1 3/4" section above the bottom flap.   P1020492
12.  Apply double sided foam tape to the bottom flap and adhere the DP, snuggling it up to the bottom edge of the matted image.
P1020500
13.  Embellish card to your liking.
Remember "Stamp up a storm, ink up a wish - and send it on to someone to brighten their day".